The Trajectory camera provides a moving guide lines (yellow ) to show the driver the intended path of travel when he turns the steering. This is only guide and the driver should not be too dependent on what he sees on the HU.
The system consist of a harness with a special camera and trajectory module.
Golf/Polo/EOS/ Passat Trajectory Kit |
Tiguan /Touran Trajectory Kit |
After installation, there would be an error code for the camera calibration |
The only way to calibrate the Camera is to use the VAS PC software...i.e. VAS5054A and the Calibration Tool VAS6350 which cost about US$1750 !
( Snap On VAS6350 Calibration Tool )
Had did some improvisation and managed to get the calibration done none the less !
Using the "special" calibration template |
Calibration Template as seen from RNS510 Head Unit.
|
After camera reconises the VAS6350 template, calibration process goes into Phase 2 |
In Phase 2, if wrong data are keyed into the calibration process, i.e. camera height, template height and distance....the process would end in error message " Input Data Beyond Calibration Value" .
Previous attempt to calibrate resulted in successful attempt but an error code would still appear on the 6C Back Up Camera Module |
Calibrating Bern's Passat CC
The Picture seems sharper and clearer after the calibration.....or is it my imagination ? |
No comments:
Post a Comment