Inner Brake and Signal Lights for Passat B6

Visit my main listing here

30 Sept 2013 : SMD LED Brake/Signal Ring Installation

This is a video of the vehicle before and after modification....


Youtube Source : Passat Additional Lights ( HD quality )

Close Up Video of the Lights : Passat Rear Lights 

In order to enhance the rear visibility of the Passat B6, dual brake and signal lights would be added onto the inner lights mounted on the boot lid.  

These SMD LED dual colour rings are designed for the Passat B6/Jetta 5/Golf 5 Valeo tail lights.

Removed the inner lights of the Passat B6 and dismantled the lens to get to the inner reflector assembly 

Drilled out the blanks and finish hole diameter at 6mm

Install the SMDLED rings over the reflector housing.  Modification is needed to get the ring to fit properly. 

The ring would fit nicely over the housing.

Assembly of the housing back into the light assembly

The ring is designed to fit exactly into the original housing

Testing : Brake Light

Testing : Signal Light 

Reattached the lens back to the housing and seal it with clear polymer sealant. To do final install tomorrow.